LED Lighting Retrofits
Commercial, industrial, exterior and parking. Up to 70% wattage reduction.
Learn more
Commercial Energy Solutions
Save with efficient hardware. Control it intelligently. Monitor and predict with data. Every solution is engineered, incentive-funded where eligible, and verified.
What energy solutions does SSI offer?
Silver State Incentives delivers 16 commercial energy technologies in three groups: Save (efficiency hardware), Control (smart building controls) and Monitor & Predict (data and intelligence). Combined, they cut kWh, peak kW, maintenance and downtime, and NV Energy incentives offset part of the cost.
Save
Efficiency hardware that cuts kWh and peak kW at the source.USES Power Shaver
Power-quality and kW/kWh reduction at the electrical panel, verified by metering.
Learn moreVariable Frequency Drives (VFDs)
Match motor speed to demand on fans, pumps, compressors and AHUs.
Learn moreHVAC Retrofits
High-efficiency RTUs, SEER/EER optimization and peak demand reduction.
Learn moreRefrigeration Upgrades
EC motors, case controls, anti-sweat heater controls, gaskets and night covers.
Learn moreControl
Smart building controls that run equipment only when it adds value.Networked Lighting Controls (NLC)
Occupancy, daylight harvesting, high-end trim and scheduling. Raises incentives 20–50%.
Learn moreHVAC Controls
Smart thermostats, scheduling, setpoint optimization, economizers and demand limiting.
Learn moreBuilding Management Systems (BMS)
Integration, optimization, scheduling and alarm management.
Learn moreCO2 / Demand-Controlled Ventilation
CO2 sensors modulate outside air to cut HVAC load while protecting air quality.
Learn moreMonitor & Predict
Data and intelligence that verifies savings and prevents failures.Eniscope Energy Management
Real-time, circuit-level metering with cloud analytics (Best.Energy).
Learn moreAccuenergy EMS
Revenue-grade meters and cloud monitoring for whole-building and sub-metering.
Learn moreVirtual Energy Management (VEM)
24/7/365 AI-assisted analyst team, IPMVP M&V and alarm management.
Learn morePredictive Maintenance & Vibration Sensors
Wireless vibration and temperature sensors catch failures before downtime.
Learn moreWater & Gas Usage Sensors
Sub-metering, leak and anomaly detection, and usage benchmarking.
Learn moreIndoor Air Quality (CO2) Monitoring
Occupant health, ventilation verification and DCV data.
Learn moreGeneration & Power
On-site generation and power quality.
Learn moreBenefits
Why a connected approach pays more
Lower OpEx, higher EBITDA
Every dollar of energy cost removed increases EBITDA directly.
Incentive-funded
NV Energy incentives offset part of eligible project costs.
Verified results
IPMVP-compliant M&V proves the savings.
24/7/365 persistence
VEM keeps savings from drifting away.
Less downtime
Predictive maintenance catches failures early.
Lower carbon
Every kWh saved avoids CO2 at the Nevada grid rate.
The Connected Facility
Every system, one source of truth
Hover or tap a hotspot. Each technology saves on its own; connected to Virtual Energy Management, the savings are measured, protected and verified.
Explore
Select a technology
Hotspots light up as you explore. Data lines show every sensor reporting to the central VEM dashboard.
How incentives offset this
Utility capital pays for part of the upgrade
Most solutions on this page are eligible for NV Energy prescriptive or custom incentives in the current program year. We package measures to capture the largest eligible incentive, then verify savings so the incentive and the results hold up.
- We identify every eligible NV Energy prescriptive and custom incentive.
- We stack lighting with controls to raise the incentive 20–50%.
- We prepare and submit the application, then verify savings under IPMVP.
Savings calculator
Estimate monitoring and EMS savings
Adjust the inputs for a planning estimate. The full calculator adds incentives, payback, CO2 and a 10-year view.
Assumes $0.10/kWh and $12/kW-month. Change rates in the full calculator.
Estimated annual savings
$0
Planning estimate only. Actual savings and incentives are confirmed through an on-site audit and utility program approval.
FAQ
Frequently asked questions
Which technology should we start with?
Usually the measures with the highest SIR: often LED with controls, refrigeration or VFDs. The audit ranks every measure by return.
Can technologies be combined?
Yes, and they should be. LED + NLC + Eniscope, VFD + vibration sensors, and HVAC controls + CO2 DCV are common bundles that raise savings and incentives.
Do all solutions qualify for incentives?
Many do. Eligibility depends on the measure and the current NV Energy program year. Some, like predictive maintenance, are justified on operational savings.
How are savings verified?
Under IPMVP, using metered baselines and post-installation data, monitored by our VEM team.
Do you show manufacturer brands?
We name the platforms we deploy. Logos appear only with partner permission.
Turn Your Overhead Into Net Profit.
Book a no-pressure consultation with a veteran energy consultant. We will show you the savings, the incentive and the payback before you commit.
Every month you wait is money lost to inefficiency. Incentive funding is limited per program year.